I2SE Logo

Duckbill EnOcean

EnOcean Ethernet Home Automation Gateway

Home automation system with Ethernet and EnOcean TCM310 transceiver in a USB stick

The stick integrates the EnOcean module TCM310.

Duckbill EnOcean is ideally suited for use in gateways to building automation systems as well as a stand-alone home controller. The Duckbill EnOcean is made to run your own application under the provided Linux system.

Versions with Z-wave and ZigBee on request.

Microcontroller:

Power supply:

Power consumption:

Storage:

Network interface:

RF interface:

Antenna:

Operating system:

Size:

Freescale i.MX283

5 V via USB

< 2.5 W

Micro SD card

10/100 Mbit/s Ethernet

EnOcean TCM310

integrated

Linux kernel 3.10

90 mm x 25 mm x 22 mm

Duckbill 485

ARM9 based Linux server with Modbus interface

ARM9 based Linux server with Ethernet and RS485 interface in a USB stick

With the integrated RS485 transceiver you can run Modbus 485 as well as Modbus TCP applications on the same hardware. Duckbill 485 is ideally suited for

- Connection of household appliances

- Connection of PV system components

Microcontroller:

Power supply:

Power consumption:

Storage:

Network interface:

Serial interface:

Termination resistors:

Operating system:

Size:

Freescale i.MX283

5 V via USB

< 2.5 W

Micro SD card

10/100 Mbit/s Ethernet

RS485

plugable

Linux kernel 3.10

90 mm x 25 mm x 22 mm

ARM9 based Linux server with Ethernet

and micro SD card in a USB stick

The stick can be operated either at a USB power adaptor or at a USB port of your router.

That's the way to reach and visualize all components of home automation and solar systems.

The stick is programmable in all common Linux programming languages.

Microcontroller:

Power supply:

Storage:

Network interface:

Operating system:

Size:

Freescale i.MX283

5 V via USB

Micro SD card

10/100 Mbit/s Ethernet

Linux kernel 3.10

90 mm x 25 mm x 22 mm

The open software approach enables a comprehensive further development of software by the community.

OpCoTec

Development platform for home automation

systems with powerline communication

OpCoTec is a wall plug adapter with integrated powerline Homeplug Green PHY. The secondary outlet is switchable with integrated relays.

With optional USB RF sticks OpCoTec can be used as a home automation system. I2SE provides you with a full set of drivers for internal components.

Microcontroller:

Powerline controller:

Power supply:

Storage:

Network interface:

User interfaces:

 

Operating system:

Freescale i.MX287

Qualcomm QCA7000

230 V AC

Integrated micro SD card

10/100 Mbit/s Ethernet

2*USB, 1 internal exp. slot

with SPI, UART and I2C

Linux kernel 3.10

Powerline Relay

HomePlug Green PHY based powerline

communication relay with metering function

PLC REL M can be combined with commercial HomePlug AV powerline adaptor into a network.

The implemented TCP/IP protocol allows an easy integration of the powerline relays into an existing infrastructure.

Powerline controller:

Microcontroller:

Power supply:

Power consumption:

Relay:

Maximum load current:

Inputs:

Outputs:

Qualcomm QCA7000

Freescale Photon

Mains

0.5 W

Bistable

16 A

Mains L and N

L (switched)