PLC Stamp mini 2

The PLC (PowerLine Communication) module PLC Stamp mini 2 gives your application access to powerline communication based on the HomePlug® Green PHY™ Chip QCA7005.

HomePlug Green PHY® powerline module based on QCA 7005 with line coupling

The PLC (PowerLine Communication) module PLC Stamp mini 2 gives your application access to powerline communication based on the HomePlug® Green PHY™ Chip QCA 7005. You can realize point-to-point and multi-point connections depending on your application. The data will be transmitted as Ethernet packets over the power line. This gives you the opportunity to use TCP/IP or whatever network protocols you wish to use.

The galvanic isolation from the power line is part of the module. The power supply is left to you so that you can design it right for your application.

The QCA 7005 from Qualcomm Atheros guarantees the compatibility with many other commercial powerline devices.

  • Smallest broadband powerline module with line coupling
  • System interface: SPI, UART (TTL level)
  • All QCA 7005 GPIOs are available
  • On-board QCA 7005 flash memory
  • SMD solderable

Leave us a message!

Technical Characteristics

PLC stamp mini 2
Powerline Controller
Qualcomm QCA7005
Microcontroller
Power Supply
3.3 V
Power Consumption
0.5 W
Data Rate
10 Mbit/s max.
Reach
300 m max.
Temperature Range
-40 °C to +85 °C
Size
43.5 mm x 22 mm x 6.5 mm
Unit Price
PLC stamp mini 2
Powerline Controller
Qualcomm QCA7005
Microcontroller
Power Supply
3.3 V
Power Consumption
0.5 W
Data Rate
10 Mbit/s max.
Reach
300 m max.
Temperature Range
-40 °C to +85 °C
Size
43.5 mm x 22 mm x 6.5 mm
Unit Price

Downloads